The Seal,nonmetallic Round Section, cataloged under National Stock Number 5330-01-717-1819, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Parker-Hannifin Corporation Dba Pneutronics Div Engineered Polymer Systems. Government technical data includes 4 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-717-1819 |
| Primary Part Number | 11518 H1L5 |
| Item Name | Seal,nonmetallic Round Section |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Parker-Hannifin Corporation Dba Pneutronics Div Engineered Polymer Systems |
| Status | ACTIVE |
| Temp Rating | -20.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF |
| Aperture Width | 2.375 INCHES NOMINAL IN |
| Material | RUBBER OVERALL |
| Construction | ONE-PIECE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11518 H1L5 PRIMARY | Parker-Hannifin Corporation Dba Pneutronics Div Engineered Polymer Systems (USA) |
NSN 5330-01-717-1819 is a Seal,nonmetallic Round Section, manufactured by Parker-Hannifin Corporation Dba Pneutronics Div Engineered Polymer Systems, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-717-1819 has 1 manufacturer part number on file: 11518 H1L5 (Parker-Hannifin Corporation Dba Pneutronics Div Engineered Polymer Systems).
Key specifications for 11518 H1L5: Temp Rating: -20.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF; Aperture Width: 2.375 INCHES NOMINAL IN; Special Features: POLYMER MATERIAL OPTIONS: NITRILE BUTADIENE RUBBER (NBR, XNBR); SHAFT SEAL MATERIAL: RUBBER; SEAL TYPE: COMPOSITE RUBBER/ARAMID FIBER HEEL; WIDTH (INCH): 0.313; SHAFT DIAMETER (INCH): 1.750; MAXIMUM OPERATING PRESSURE: 0 TO 7 DEPENDING ON SHAFT SPEED PSI; MAXIMUM SURFACE SPEED: 2500 (12/7 M/S) FT/MIN; SIZE: 0.250 TO 62.500 INCH MAXIMUM; SHAFT RUNOUT: 0.010 INCH; MAXIMUM SHAFT-TO-BORE MISALIGNMENT: 0.010 INCH IN; Part Name Assigned by Controlling Agency: GENERAL PURPOSE CLIPPER OIL SEAL. 4 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.