The Gasket, cataloged under National Stock Number 5330-01-565-4536, is classified within Federal Supply Class 5330 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Eaton Corporation Dba Eaton Inoac. Government technical data includes 6 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-565-4536 |
| Primary Part Number | MS29512-04 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — No Item Name Available |
| Manufacturer | Eaton Corporation Dba Eaton Inoac |
| Status | ACTIVE |
| Elongation Percentage | 200 MAXIMUM |
| Center Hole Diameter | 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN |
| Hardness Rating | 65.0 SHORE DUROMETER A NOMINAL OVERALL |
| Temp Rating | -65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| Cross-Sectional Height | 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MS29512-04 | Haulmark Trailers (australia) Pty Ltd (AUS) |
| MS29512-04 PRIMARY | Eaton Corporation Dba Eaton Inoac (USA) |
| MS29512-04 | Leonardo Spa Aeronautics Division - Pomigliano D'arco Site (ITA) |
NSN 5330-01-565-4536 is a Gasket, manufactured by Eaton Corporation Dba Eaton Inoac, classified under FSC 5330 (No Item Name Available). Status: active.
NSN 5330-01-565-4536 has 3 cross-referenced part numbers: MS29512-04 (Haulmark Trailers (australia) Pty Ltd), MS29512-04 (Eaton Corporation Dba Eaton Inoac), MS29512-04 (Leonardo Spa Aeronautics Division - Pomigliano D'arco Site).
There are 2 known substitutes for 5330-01-565-4536: 5331-00-166-5994, 5331-00-263-8028. Verify interchangeability with system specifications before substitution.
Key specifications for MS29512-04: Elongation Percentage: 200 MAXIMUM; Center Hole Diameter: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN; Hardness Rating: 65.0 SHORE DUROMETER A NOMINAL OVERALL; Temp Rating: -65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF. 8 total characteristics are documented in the Federal Logistics Information System.