The Seal,nonmetallic Special Shaped, cataloged under National Stock Number 5330-01-508-8204, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-508-8204 |
| Item Name | Seal,nonmetallic Special Shaped |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.025 INCHES MINIMUM AND 0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM0.045 INCHES MAXIMUM IN |
| Cross-Sectional Height | 0.485 INCHES MINIMUM AND 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM0.515 INCHES MAXIMUM IN |
| Cross-Sectional Width | 1.585 INCHES MINIMUM AND 1.585 INCHES MINIMUM AND 1.615 INCHES MAXIMUM1.615 INCHES MAXIMUM IN |
| Style Designator | STRIP |
| Material Document and Classification | BOEING SPEC. DMS2221,TYPE 1,GRADE 50 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | HOLLOW BULBHOLLOW BULB |
| Cross Section Inside Diameter | 0.380 INCHES MINIMUM AND 0.380 INCHES MINIMUM AND 0.420 INCHES MAXIMUM0.420 INCHES MAXIMUM IN |
| Material | RUBBER SILICONE CLASS Q OVERALL |
| Construction | ONE-PIECEONE-PIECE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7040C5-11D0010 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 11D0010-12000 | 3/2 Design control — primary reference U.S. Government activity |
| 11D0010 | D/9 Drawing number reference only U.S. Government activity |
NSN 5330-01-508-8204 is a Seal,nonmetallic Special Shaped, classified under FSC 5330, Packing and Gasket Materials. Status: active.
Key specifications for 5330-01-508-8204: Cross-Sectional Thickness: 0.025 INCHES MINIMUM AND 0.025 INCHES MINIMUM AND 0.045 INCHES MAXIMUM0.045 INCHES MAXIMUM IN; Cross-Sectional Height: 0.485 INCHES MINIMUM AND 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM0.515 INCHES MAXIMUM IN; Cross-Sectional Width: 1.585 INCHES MINIMUM AND 1.585 INCHES MINIMUM AND 1.615 INCHES MAXIMUM1.615 INCHES MAXIMUM IN; Style Designator: STRIP. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.