The Packing with Retainer, cataloged under National Stock Number 5330-01-463-5621, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-463-5621 |
| Item Name | Packing with Retainer |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Retainer Inside Diameter | 1.351 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINER |
| Packing Inside Diameter | 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN |
| Outside Diameter | 1.870 INCHES MINIMUM AND 1.895 INCHES MAXIMUM IN |
| Specification/standard Data | 80205-NAS1523 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Retainer Thickness | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE RETAINER |
| Material | STEEL COMP 301 OR STEEL COMP 302 RETAINER |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING |
| Construction | TWO-PIECE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1523C-18Y | 3/2 Design control — primary reference U.S. Government activity |
| NAS1523 | 3/1 Design control — primary reference U.S. Government activity |
NSN 5330-01-463-5621 is a Packing with Retainer, classified under FSC 5330, Packing and Gasket Materials. Status: active.
Key specifications for 5330-01-463-5621: Retainer Inside Diameter: 1.351 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINER; Packing Inside Diameter: 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN; Outside Diameter: 1.870 INCHES MINIMUM AND 1.895 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.