The Gasket, cataloged under National Stock Number 5330-01-445-9159, is classified within Federal Supply Class 5330 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Defense Logistics Agency Dba Defense Supply Center Philadelphia. Government technical data includes 17 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-445-9159 |
| Primary Part Number | LL-HX0-5226 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — No Item Name Available |
| Manufacturer | Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| Status | ACTIVE |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Criticality Code Justification | ZZZY |
| Cross-Sectional Thickness | 0.032 INCHES NOMINAL IN |
| Material | RUBBER NEOPRENE OVERALL |
| Bolt Hole Quantity | 4 |
| Center to Center Distance Between Bolt Holes Along Width | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Center to Center Distance Between Bolt Holes Along Length | 1.610 INCHES MINIMUM AND 1.630 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Style Designator | NON-CIRCULAR |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BYMATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| Material Document and Classification | ASTM D2000 1BC615 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Aperture Diameter | 0.217 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN |
| Hole Diameter | 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Cross-Sectional Shape Style | SOLID SINGLE OR COMPOSITION |
| Color | BLACK |
| Outside Edge to Bolt Hole Center Distance Along Length | 0.237 INCHES NOMINAL IN |
| Outside Edge to Bolt Hole Center Distance Along Width | 0.235 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| LL-HX0-5226 | Defense Logistics Agency Dba Defense Supply Center Philadelphia (USA) |
| 32-724 | Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc (USA) |
| LO1498 | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
NSN 5330-01-445-9159 is a Gasket, manufactured by Defense Logistics Agency Dba Defense Supply Center Philadelphia, classified under FSC 5330 (No Item Name Available). Status: active.
NSN 5330-01-445-9159 has 3 cross-referenced part numbers: LL-HX0-5226 (Defense Logistics Agency Dba Defense Supply Center Philadelphia), 32-724 (Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc), LO1498 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).
There are 6 known substitutes for 5330-01-445-9159: 3040-00-441-3958, 5325-00-823-6007, 5330-01-119-8242 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for LL-HX0-5226: Test Data Document: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Overall Width: 1.704 INCHES MINIMUM AND 1.720 INCHES MAXIMUM IN; Criticality Code Justification: ZZZY; Overall Length: 2.077 INCHES MINIMUM AND 2.093 INCHES MAXIMUM IN. 19 total characteristics are documented in the Federal Logistics Information System.