The Gasket, cataloged under National Stock Number 5330-01-424-9741, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-424-9741 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.016 INCHES NOMINAL IN |
| Aperture Diameter | 0.600 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN |
| Center to Center Distance Between Bolt Holes Along Length | 1.010 INCHES MINIMUM AND 1.070 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Center to Center Distance Between Bolt Holes Along Width | 1.010 INCHES MINIMUM AND 1.070 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Outside Edge to Bolt Hole Center Distance Along Length | 0.200 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Environmental Attribute Code | ASBESTOS ALTERNATIVE PRODUCTS |
| Outside Corner Radius | 0.190 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Hole Diameter | 0.023 INCHES MINIMUM AND 0.025 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Outside Edge to Bolt Hole Center Distance Along Width | 0.200 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 204-060-184-1 NON-ASBESTOS | 3/2 Design control — primary reference U.S. Government activity |
NSN 5330-01-424-9741 is a Gasket, classified under FSC 5330, Packing and Gasket Materials. Status: active.
Key specifications for 5330-01-424-9741: Cross-Sectional Thickness: 0.016 INCHES NOMINAL IN; Overall Length: 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN; Overall Width: 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN; Aperture Diameter: 0.600 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.