The Packing,preformed, cataloged under National Stock Number 5330-01-385-8069, is classified within Federal Supply Class 5330 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Marotta Controls Inc. Government technical data includes 6 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-385-8069 |
| Primary Part Number | 283371-0003ITEM68 |
| Item Name | Packing,preformed |
| FSC / FSG | 5330 / 53 — No Item Name Available |
| Manufacturer | Marotta Controls Inc |
| Status | ACTIVE |
| Center Hole Diameter | 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN |
| Peripheral Diameter | 0.241 INCHES NOMINAL IN |
| Elongation Percentage | 125 MAXIMUM |
| Material | RUBBER FLUOROCARBON CLASS FPM OVERALL |
| Hardness Rating | 75.0 SHORE DUROMETER A NOMINAL OVERALL |
| Cross-Sectional Height | 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 283371-0003ITEM68 | Marotta Controls Inc (USA) |
| M83248/1-005 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 01-463-2298 | Replacement NSN of Temporarily Maintained NSN |
NSN 5330-01-385-8069 is a Packing,preformed, manufactured by Marotta Controls Inc, classified under FSC 5330 (No Item Name Available). Status: active.
NSN 5330-01-385-8069 has 3 cross-referenced part numbers: 283371-0003ITEM68 (Marotta Controls Inc), M83248/1-005 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 01-463-2298 (Replacement NSN of Temporarily Maintained NSN).
There is 1 known substitute for 5330-01-385-8069: 5331-00-240-3392. Verify interchangeability with system specifications before substitution.
Key specifications for 283371-0003ITEM68: Center Hole Diameter: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN; Peripheral Diameter: 0.241 INCHES NOMINAL IN; Part Name Assigned by Controlling Agency: PACKING,PREFORMED; Elongation Percentage: 125 MAXIMUM. 7 total characteristics are documented in the Federal Logistics Information System.