The Gasket,spiral Wound, cataloged under National Stock Number 5330-01-363-6097, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-363-6097 |
| Item Name | Gasket,spiral Wound |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.172 INCHES MINIMUM AND 0.172 INCHES MINIMUM AND 0.182 INCHES MAXIMUM0.182 INCHES MAXIMUM IN |
| Gage Ring Thickness | 0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN |
| Slot Quantity | 1212 |
| Material Document and Classification | AMS 4027 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| Material Document and Classification | MIL-R-83248/1 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| Outside Diameter | 11.230 INCHES NOMINAL11.230 INCHES NOMINAL IN |
| Gage Ring Outside Diameter | 8.010 INCHES NOMINAL8.010 INCHES NOMINAL IN |
| Aperture Diameter | 7.700 INCHES NOMINAL7.700 INCHES NOMINAL IN |
| Surface Treatment | CHROMATE OUTER RING |
| Material | ALUMINUM ALLOY 6061 OUTER RING |
| Material | RUBBER FLUOROCARBON CLASS FPM INNER RING |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 17B2E7003-1 | 7/2 Vendor item drawing reference U.S. Government activity |
| 751767 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5330-01-363-6097 is a Gasket,spiral Wound, classified under FSC 5330, Packing and Gasket Materials. Status: active.
Key specifications for 5330-01-363-6097: Overall Height: 0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN; Cross-Sectional Thickness: 0.172 INCHES MINIMUM AND 0.172 INCHES MINIMUM AND 0.182 INCHES MAXIMUM0.182 INCHES MAXIMUM IN; Gage Ring Thickness: 0.120 INCHES MINIMUM AND 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN; Slot Quantity: 1212. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.