The Rubber Strip, cataloged under National Stock Number 5330-01-309-7233, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 6 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-309-7233 |
| Primary Part Number | 9456M92P02 |
| Item Name | Rubber Strip |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Temp Rating | 150.0 FAHRENHEIT DEGF |
| Length | 45.625 INCHES NOMINAL IN |
| Cross-Sectional Height | 0.960 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN |
| Cross-Sectional Width | 0.900 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN |
| Material | RUBBER |
| Nonmetallic Hardness Rating | 60.0 NOMINAL SHORE DUROMETER A |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 9456M92P02 PRIMARY | General Electric Company (USA) |
| Reference | Meaning |
|---|---|
| 9456M92P01 | 3/9 Design control — primary reference General Electric Company |
| HSX-3883-13 | 5/2 Secondary reference U.S. Government activity |
NSN 5330-01-309-7233 is a Rubber Strip, manufactured by General Electric Company, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-309-7233 has 1 manufacturer part number on file: 9456M92P02 (General Electric Company).
Key specifications for 9456M92P02: Temp Rating: 150.0 FAHRENHEIT DEGF; Length: 45.625 INCHES NOMINAL IN; Cross-Sectional Height: 0.960 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN; Cross-Sectional Width: 0.900 INCHES MINIMUM AND 0.920 INCHES MAXIMUM IN. 6 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.