The Seal,nonmetallic Channel, cataloged under National Stock Number 5330-01-294-3084, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-294-3084 |
| Primary Part Number | LO1588 |
| Item Name | Seal,nonmetallic Channel |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| Status | ACTIVE |
| Right Outside Angle | 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL |
| Left Tip Style | LEFT SQUARE ENDLEFT SQUARE END |
| Left Side Flange Thickness at Web | 0.031 INCHES NOMINAL0.031 INCHES NOMINAL IN |
| Left Side Flange Height | 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN |
| Right Side Flange Thickness at Web | 0.031 INCHES NOMINAL0.031 INCHES NOMINAL IN |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Criticality Code Justification | ZZZYZZZY |
| Style Designator | STRIP |
| Cross-Sectional Shape Style | OPEN CHANNELOPEN CHANNEL |
| Left Side Flange Thickness | 0.031 INCHES NOMINAL0.031 INCHES NOMINAL IN |
| Right Side Flange Height | 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN |
| Left Outside Angle | 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL |
| Right Tip Relationship with Left Tip | IDENTICALIDENTICAL |
| Right Side Flange Thickness | 0.031 INCHES NOMINAL0.031 INCHES NOMINAL IN |
| Right Inside Angle | 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL |
| Web Width | 0.188 INCHES NOMINAL0.188 INCHES NOMINAL IN |
| Left Inside Angle | 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL |
| End Cut Angle | 45.0 DEGREES45.0 DEGREES |
| Color | BLACKBLACK |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| Web Thickness | 0.062 INCHES NOMINAL0.062 INCHES NOMINAL IN |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| Construction | SOLIDSOLID |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | S |
| Part Number | Manufacturer |
|---|---|
| LO1588 | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| Reference | Meaning |
|---|---|
| 128129-4 | 3/1 Design control — primary reference U.S. Government activity |
| X-830 3.660 IN LG | 5/9 Secondary reference Atlantic India Rubber Co Inc |
| PP012943084 | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| 5NRP | 5/9 Secondary reference So-Redes, Produtora De Telas Metalicas, Lda. |
| PO012943084 | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
NSN 5330-01-294-3084 is a Seal,nonmetallic Channel, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-294-3084 has 1 manufacturer part number on file: LO1588 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).
Key specifications for LO1588: Right Outside Angle: 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL; Left Tip Style: LEFT SQUARE ENDLEFT SQUARE END; Left Side Flange Thickness at Web: 0.031 INCHES NOMINAL0.031 INCHES NOMINAL IN; Left Side Flange Height: 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN. 24 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.