The Gasket, cataloged under National Stock Number 5330-01-267-1130, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-267-1130 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.031 INCHES NOMINAL IN |
| Inside Corner Radius | 0.130 INCHES NOMINAL IN |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Criticality Code Justification | ZZZY |
| Style Designator | NON-CIRCULAR |
| Material Document and Classification | MIL-R-6130,TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | SOLID SINGLE OR COMPOSITION |
| Aperture Width | 0.440 INCHES NOMINAL IN |
| Aperture Length | 0.800 INCHES NOMINAL IN |
| Bolt Hole Quantity | 2 |
| Outside Edge to Bolt Hole Center Distance Along Length | 0.310 INCHES NOMINAL IN |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | RUBBER CHLOROPRENE CLASS CR OVERALL |
| Hole Diameter | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Outside Edge to Bolt Hole Center Distance Along Width | 0.260 INCHES NOMINAL IN |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | Y |
| Reference | Meaning |
|---|---|
| LL-HX5-1167 | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| 6096D83-H03 | 3/1 Design control — primary reference Northrop Grumman Systems Corporation Div Marine Systems |
NSN 5330-01-267-1130 is a Gasket, classified under FSC 5330, Packing and Gasket Materials. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5330-01-312-5258. Verify interchangeability with system specifications before substitution.
Key specifications for 5330-01-267-1130: Cross-Sectional Thickness: 0.031 INCHES NOMINAL IN; Inside Corner Radius: 0.130 INCHES NOMINAL IN; Special Test Features: SPECIAL QUALITY CONTROL TESTING; Criticality Code Justification: ZZZY. 16 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.