PartsTable TECHNICAL DATA SHEET
NSN 5330-01-163-3296Government record, cited

Rubber Strip5330-01-163-3296

NSN 5330-01-163-3296 · NIIN 011633296 · Part number LO-011633296
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) · FSC 5330 — Packing and Gasket Materials · FSG 53 — Hardware and Abrasives · CAGE 16236
Government record, cited
NSN 5330-01-163-3296 — this item is cataloged by the U.S. Government under National Stock Number 5330-01-163-3296. Manufacturer of record part number: LO-011633296.
Also searched as  5330-01-163-3296 · 5330011633296 · NIIN 011633296 · 01-163-3296 · FSC 5330 Packing and Gasket Materials · CAGE 16236 · LO-011633296 · PO0371NRP · 113698-2 · LO8015
Nearby stock numbers  ·
Features
  • Rubber Strip — FSC 5330
  • Length: 23.250 INCHES MINIMUM AND 23.281 INCHES MAXIMUM IN
  • Cross-Sectional Height: 1.000 INCHES NOMINAL IN
  • Cross-Sectional Width: 0.188 INCHES NOMINAL IN
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Criticality Code Justification: ZZZY
  • Material Document and Classification: MIL-R-6130, TYPE 2, GRADE A, COND SOFT MIL SPEC SINGLE MATERIAL RESPONSE
  • Surface Condition: SMOOTH BOTH SIDES
Identification
  • NSN: 5330-01-163-3296
  • NIIN: 011633296
  • FSC: 5330 — Packing and Gasket Materials
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: LO-011633296
  • Manufacturer: Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
General Description

The Rubber Strip, cataloged under National Stock Number 5330-01-163-3296, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5330-01-163-3296
Primary Part NumberLO-011633296
Item NameRubber Strip
FSC / FSG5330 / 53 — Packing and Gasket Materials
ManufacturerDla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
StatusACTIVE
Length23.250 INCHES MINIMUM AND 23.281 INCHES MAXIMUM IN
Cross-Sectional Height1.000 INCHES NOMINAL IN
Cross-Sectional Width0.188 INCHES NOMINAL IN
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Criticality Code JustificationZZZY
Material Document and ClassificationMIL-R-6130, TYPE 2, GRADE A, COND SOFT MIL SPEC SINGLE MATERIAL RESPONSE
Surface ConditionSMOOTH BOTH SIDES
Cross-Sectional Shape StyleRECTANGULAR
Environmental ProtectionFIRE RESISTANT AND OIL RESISTANT
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialRUBBER CHLOROPRENE CLASS CR
Fabrication MethodCELLULAR, UNEXPLODED
Reference Number Differentiating CharacteristicsRERFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MASNUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeS
Cross-Reference Index
Part NumberManufacturer
LO-011633296 Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA)
Reference documents
ReferenceMeaning
PO0371NRP 5/9 Secondary reference
Defense Logistics Agency Dba Defense Supply Center Philadelphia
113698-2 3/1 Design control — primary reference
U.S. Government activity
LO8015 5/9 Secondary reference
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
No interchangeability data on file.
Other items in FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085
RETAINER
5330-00-000-0167
PARTS KIT,SEAL REPLACEMENT,MECHA
5330-00-000-5275
5330-00-000-5275 · Item name not on file
5330-00-001-1260
SEAL,NONMETALLIC SPECIAL SHAPED
5330-00-001-1833
SEAL,PLAIN ENCASED
5330-00-001-1844
GLAND,RESERVOIR,INDICATOR END
5330-00-001-1845
5330-00-001-1845 · Item name not on file
5330-00-001-1846
5330-00-001-1846 · Item name not on file

Frequently Asked Questions

What is NSN 5330-01-163-3296?

NSN 5330-01-163-3296 is a Rubber Strip, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5330, Packing and Gasket Materials. Status: active.

What part numbers are listed for NSN 5330-01-163-3296?

NSN 5330-01-163-3296 has 1 manufacturer part number on file: LO-011633296 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).

What are the specifications of LO-011633296?

Key specifications for LO-011633296: Length: 23.250 INCHES MINIMUM AND 23.281 INCHES MAXIMUM IN; Cross-Sectional Height: 1.000 INCHES NOMINAL IN; Cross-Sectional Width: 0.188 INCHES NOMINAL IN; Special Test Features: SPECIAL QUALITY CONTROL TESTING. 13 specifications are documented in the U.S. Government catalog.

Is NSN 5330-01-163-3296 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com