The Seal,nonmetallic Special Shaped, cataloged under National Stock Number 5330-01-156-5022, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 5 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-156-5022 |
| Item Name | Seal,nonmetallic Special Shaped |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Height | 0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN |
| Cross-Sectional Width | 0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN |
| Material Document and Classification | 5221,FSCM 19912 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Material | RUBBER SILICONE CLASS Q OVERALL |
| Construction | ONE-PIECEONE-PIECE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 88848 | 3/9 Design control — primary reference Caloric Corp/glenwood Range |
| 74090-04 | 5/9 Secondary reference Caloric Corp/glenwood Range |
NSN 5330-01-156-5022 is a Seal,nonmetallic Special Shaped, classified under FSC 5330, Packing and Gasket Materials. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 6130-01-530-6862. Verify interchangeability with system specifications before substitution.
Key specifications for 5330-01-156-5022: Cross-Sectional Height: 0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN; Cross-Sectional Width: 0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN; Material Document and Classification: 5221,FSCM 19912 MFR REF SINGLE MATERIAL RESPONSE OVERALL; Overall Length: 21.500 INCHES NOMINAL21.500 INCHES NOMINAL IN. 5 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.