The Seal,nonmetallic Strip, cataloged under National Stock Number 5330-01-138-6361, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Texas Instruments Inc Metallurgical Materials Div. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-138-6361 |
| Primary Part Number | R1154-14-1 |
| Item Name | Seal,nonmetallic Strip |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Texas Instruments Inc Metallurgical Materials Div |
| Status | ACTIVE |
| Attachment Hole Diameter | 0.710 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN |
| Attachment Feature Quantity | 12 |
| Cross-Sectional Height | 5.970 INCHES MINIMUM AND 6.730 INCHES MAXIMUM IN |
| Cross-Sectional Width | 0.890 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN |
| End Cut Angle | 27.0 DEGREES |
| Material | RUBBER SILICONE CLASS Q SEALING ELEMENT |
| Fabrication Method | SOLID |
| Construction | SOLID |
| Attachment Method | ROUND HOLE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| R1154-14-1 PRIMARY | Texas Instruments Inc Metallurgical Materials Div (USA) |
| Reference | Meaning |
|---|---|
| PZZR765-002-02 | 7/2 Vendor item drawing reference Us Army Aviation and Missile Command |
NSN 5330-01-138-6361 is a Seal,nonmetallic Strip, manufactured by Texas Instruments Inc Metallurgical Materials Div, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-138-6361 has 1 manufacturer part number on file: R1154-14-1 (Texas Instruments Inc Metallurgical Materials Div).
Key specifications for R1154-14-1: Attachment Hole Diameter: 0.710 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN; Attachment Feature Quantity: 12; Cross-Sectional Height: 5.970 INCHES MINIMUM AND 6.730 INCHES MAXIMUM IN; Cross-Sectional Width: 0.890 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.