The Seal,nonmetallic Strip, cataloged under National Stock Number 5330-01-070-8211, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Eaton Corp Dba Eaton Aerospace Jackson. Government technical data includes 10 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-070-8211 |
| Primary Part Number | 215108 |
| Item Name | Seal,nonmetallic Strip |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Eaton Corp Dba Eaton Aerospace Jackson |
| Status | ACTIVE |
| End Cut Length | 0.180 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN |
| Cross-Sectional Height | 0.175 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN |
| Cross-Sectional Width | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| Style Designator | STRIP |
| Material Document and Classification | MIL-P-5315 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | RECTANGULAR |
| End Cut Angle | 50.0 DEGREES |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| Fabrication Method | SOLID |
| Construction | SOLID |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 215108 PRIMARY | Eaton Corp Dba Eaton Aerospace Jackson (USA) |
NSN 5330-01-070-8211 is a Seal,nonmetallic Strip, manufactured by Eaton Corp Dba Eaton Aerospace Jackson, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-070-8211 has 1 manufacturer part number on file: 215108 (Eaton Corp Dba Eaton Aerospace Jackson).
Key specifications for 215108: End Cut Length: 0.180 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN; Cross-Sectional Height: 0.175 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN; Cross-Sectional Width: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN; Style Designator: STRIP. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.