The Seal,nonmetallic Strip, cataloged under National Stock Number 5330-01-006-3962, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-01-006-3962 |
| Primary Part Number | 11608318-4 |
| Item Name | Seal,nonmetallic Strip |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Cross-Sectional Height | 0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Inside Corner Radius | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Cross-Sectional Width | 0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Cross-Sectional Shape Style | D |
| Aperture Width | 4.520 INCHES MINIMUM AND 4.540 INCHES MAXIMUM IN |
| Aperture Length | 4.520 INCHES MINIMUM AND 4.540 INCHES MAXIMUM IN |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL |
| Fabrication Method | SOLID |
| Construction | SOLID |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11608318-4 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
NSN 5330-01-006-3962 is a Seal,nonmetallic Strip, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-01-006-3962 has 1 manufacturer part number on file: 11608318-4 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 11608318-4: Cross-Sectional Height: 0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN; Inside Corner Radius: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; Cross-Sectional Width: 0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN; Cross-Sectional Shape Style: D. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.