The Seal,nonmetallic Channel, cataloged under National Stock Number 5330-00-948-9912, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-948-9912 |
| Item Name | Seal,nonmetallic Channel |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Right Outside Angle | 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL |
| Left Side Flange Thickness at Web | 0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM IN |
| Left Side Flange Height | 0.365 INCHES MINIMUM AND 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM0.395 INCHES MAXIMUM IN |
| Right Side Flange Thickness at Web | 0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-36855 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Left Side Flange Thickness | 0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM IN |
| Right Side Flange Height | 0.365 INCHES MINIMUM AND 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM0.395 INCHES MAXIMUM IN |
| Left Outside Angle | 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL |
| Right Side Flange Thickness | 0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM IN |
| Right Inside Angle | 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL |
| Web Width | 0.165 INCHES MINIMUM AND 0.165 INCHES MINIMUM AND 0.195 INCHES MAXIMUM0.195 INCHES MAXIMUM IN |
| Left Inside Angle | 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL |
| End Cut Angle | 90.0 DEGREES90.0 DEGREES |
| Material | RUBBER SYNTHETIC OVERALL |
| Web Thickness | 0.040 INCHES MINIMUM AND 0.040 INCHES MINIMUM AND 0.100 INCHES MAXIMUM0.100 INCHES MAXIMUM IN |
| Construction | SOLIDSOLID |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 205-060-807-081 | 3/2 Design control — primary reference U.S. Government activity |
| 205-060-807-81 | 5/9 Secondary reference U.S. Government activity |
NSN 5330-00-948-9912 is a Seal,nonmetallic Channel, classified under FSC 5330, Packing and Gasket Materials. Status: active.
Key specifications for 5330-00-948-9912: Right Outside Angle: 90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL; Left Side Flange Thickness at Web: 0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM IN; Left Side Flange Height: 0.365 INCHES MINIMUM AND 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM0.395 INCHES MAXIMUM IN; Right Side Flange Thickness at Web: 0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.