The Seal,nonmetallic Special Shaped, cataloged under National Stock Number 5330-00-883-1337, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-883-1337 |
| Primary Part Number | 11070190-1 |
| Item Name | Seal,nonmetallic Special Shaped |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.016 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| Cross-Sectional Height | 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN |
| Cross-Sectional Width | 1.344 INCHES MINIMUM AND 1.468 INCHES MAXIMUM IN |
| Style Designator | STRIP |
| Material Document and Classification | ZZ-R-765,CL 3,GR 50 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | HOLLOW BULB |
| Cross Section Inside Diameter | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN |
| End Cut Angle | 44.0 DEGREES AND 46.0 DEGREES |
| Material | RUBBER SILICONE CLASS Q OVERALL |
| Fabrication Method | SOLID |
| Construction | SOLID |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11070190-1 PRIMARY | Us Army Aviation and Missile Command (USA) |
NSN 5330-00-883-1337 is a Seal,nonmetallic Special Shaped, manufactured by Us Army Aviation and Missile Command, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-00-883-1337 has 1 manufacturer part number on file: 11070190-1 (Us Army Aviation and Missile Command).
Key specifications for 11070190-1: Cross-Sectional Thickness: 0.016 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN; Cross-Sectional Height: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN; Cross-Sectional Width: 1.344 INCHES MINIMUM AND 1.468 INCHES MAXIMUM IN; Style Designator: STRIP. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.