The Packing with Retainer, cataloged under National Stock Number 5330-00-781-7285, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-781-7285 |
| Item Name | Packing with Retainer |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Surface Treatment Document and Classification | QQ-P-416,CL 3 FED SPEC ALL TREATMENT RESPONSES RETAINER |
| Packing Inside Diameter | 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN |
| Outside Diameter | 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN |
| Packing Ring Cross-Sectional Diameter | 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| Retainer Thickness | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE RETAINER |
| Material | STEEL COMP 4130 RETAINER |
| Material | RUBBER CHLOROPRENE CLASS CR PACKING |
| Construction | ONE-PIECE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 600-742-10-0S | 5/9 Secondary reference Parker-Hannifin Corporation Dba Pneutronics Div Corporate Headquarters |
| 600-742-10-0S | 3/2 Design control — primary reference U.S. Government activity |
NSN 5330-00-781-7285 is a Packing with Retainer, classified under FSC 5330, Packing and Gasket Materials. Status: active.
Key specifications for 5330-00-781-7285: Surface Treatment Document and Classification: QQ-P-416,CL 3 FED SPEC ALL TREATMENT RESPONSES RETAINER; Packing Inside Diameter: 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN; Outside Diameter: 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN; Packing Ring Cross-Sectional Diameter: 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.