The Gasket, cataloged under National Stock Number 5330-00-718-7357, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is The W.w. Williams Company, Llc. Government technical data includes 3 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-718-7357 |
| Primary Part Number | 6759499 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | The W.w. Williams Company, Llc |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN |
| Bolt Hole Quantity | 21 |
| Hole Diameter | 0.410 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 6759499 PRIMARY | The W.w. Williams Company, Llc (USA) |
| Reference | Meaning |
|---|---|
| 376MFW1 | 5/9 Secondary reference Linde Lift Truck Corp. |
| 6759499 | 3/9 Design control — primary reference Allison Transmission Inc Dba Allison Transmission, Inc |
| 6759499 | 5/9 Secondary reference General Motors Corp |
NSN 5330-00-718-7357 is a Gasket, manufactured by The W.w. Williams Company, Llc, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-00-718-7357 has 1 manufacturer part number on file: 6759499 (The W.w. Williams Company, Llc).
Key specifications for 6759499: Cross-Sectional Thickness: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN; Bolt Hole Quantity: 21; Special Features: TWO BOLT HOLES 0.620 IN. DIA; ONE BOLT HOLE 0.500 IN. DIA; ONE BOLT HOLE 0.560 IN. DIA IN; Hole Diameter: 0.410 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. 3 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.