The Gasket, cataloged under National Stock Number 5330-00-705-9101, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-705-9101 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.060 INCHES NOMINAL IN |
| Inside Corner Radius | 0.190 INCHES NOMINAL IN |
| Hardness Rating | 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL |
| Cross-Sectional Shape Style | SOLID SINGLE OR COMPOSITION |
| Aperture Width | 4.900 INCHES NOMINAL IN |
| Aperture Length | 6.000 INCHES NOMINAL IN |
| Center to Center Distance Between Bolt Holes Along Length | 2.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
| Center to Center Distance Between Bolt Holes Along Width | 2.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
| Outside Edge to Bolt Hole Center Distance Along Length | 1.255 INCHES NOMINAL IN |
| Outside Corner Radius | 0.380 INCHES NOMINAL IN |
| Hole Diameter | 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
| Outside Edge to Bolt Hole Center Distance Along Width | 1.948 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SMB285289 | 5/2 Secondary reference U.S. Government activity |
| 699B448P1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5330-00-705-9101 is a Gasket, classified under FSC 5330, Packing and Gasket Materials. Status: active.
Key specifications for 5330-00-705-9101: Cross-Sectional Thickness: 0.060 INCHES NOMINAL IN; Inside Corner Radius: 0.190 INCHES NOMINAL IN; Hardness Rating: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL; Overall Length: 7.500 INCHES NOMINAL IN. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.