The Seal,nonmetallic Special Shaped, cataloged under National Stock Number 5330-00-703-9087, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-703-9087 |
| Item Name | Seal,nonmetallic Special Shaped |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Height | 0.143 INCHES NOMINAL0.143 INCHES NOMINAL IN |
| Inside Corner Radius | 0.120 INCHES NOMINAL0.120 INCHES NOMINAL IN |
| Cross-Sectional Width | 0.180 INCHES MINIMUM AND 0.180 INCHES MINIMUM AND 0.205 INCHES MAXIMUM0.205 INCHES MAXIMUM IN |
| Style Designator | NON-CIRCULAR |
| Material Document and Classification | AMS 3301 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | SPECIALSPECIAL |
| Aperture Width | 2.818 INCHES MINIMUM AND 2.818 INCHES MINIMUM AND 2.858 INCHES MAXIMUM2.858 INCHES MAXIMUM IN |
| Aperture Length | 4.515 INCHES MINIMUM AND 4.515 INCHES MINIMUM AND 4.635 INCHES MAXIMUM4.635 INCHES MAXIMUM IN |
| Outside Corner Radius | 0.325 INCHES NOMINAL0.325 INCHES NOMINAL IN |
| Material | RUBBER SILICONE CLASS Q OVERALL |
| Fabrication Method | SOLIDSOLID |
| Construction | SOLIDSOLID |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 114C0536-1 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation |
NSN 5330-00-703-9087 is a Seal,nonmetallic Special Shaped, classified under FSC 5330, Packing and Gasket Materials. Status: active.
Key specifications for 5330-00-703-9087: Cross-Sectional Height: 0.143 INCHES NOMINAL0.143 INCHES NOMINAL IN; Inside Corner Radius: 0.120 INCHES NOMINAL0.120 INCHES NOMINAL IN; Cross-Sectional Width: 0.180 INCHES MINIMUM AND 0.180 INCHES MINIMUM AND 0.205 INCHES MAXIMUM0.205 INCHES MAXIMUM IN; Style Designator: NON-CIRCULAR. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.