The Seal,nonmetallic Special Shaped, cataloged under National Stock Number 5330-00-651-7182, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-651-7182 |
| Item Name | Seal,nonmetallic Special Shaped |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.055 INCHES MINIMUM AND 0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM IN |
| Cross-Sectional Height | 0.160 INCHES MINIMUM AND 0.160 INCHES MINIMUM AND 0.220 INCHES MAXIMUM0.220 INCHES MAXIMUM IN |
| Cross-Sectional Width | 0.710 INCHES MINIMUM AND 0.710 INCHES MINIMUM AND 0.790 INCHES MAXIMUM0.790 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-6855,GR 40 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Cross-Sectional Shape Style | HOLLOW BULBHOLLOW BULB |
| Cross Section Inside Diameter | 0.077 INCHES MINIMUM AND 0.077 INCHES MINIMUM AND 0.109 INCHES MAXIMUM0.109 INCHES MAXIMUM IN |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| Fabrication Method | SOLIDSOLID |
| Construction | SOLIDSOLID |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 346183-7 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5330-00-651-7182 is a Seal,nonmetallic Special Shaped, classified under FSC 5330, Packing and Gasket Materials. Status: active.
Key specifications for 5330-00-651-7182: Cross-Sectional Thickness: 0.055 INCHES MINIMUM AND 0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM0.075 INCHES MAXIMUM IN; Cross-Sectional Height: 0.160 INCHES MINIMUM AND 0.160 INCHES MINIMUM AND 0.220 INCHES MAXIMUM0.220 INCHES MAXIMUM IN; Cross-Sectional Width: 0.710 INCHES MINIMUM AND 0.710 INCHES MINIMUM AND 0.790 INCHES MAXIMUM0.790 INCHES MAXIMUM IN; Material Document and Classification: MIL-S-6855,GR 40 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.