The Packing with Retainer, cataloged under National Stock Number 5330-00-558-1732, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-558-1732 |
| Item Name | Packing with Retainer |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Packing Inside Diameter | 0.555 INCHES NOMINAL IN |
| Outside Diameter | 1.062 INCHES NOMINAL IN |
| Packing Ring Cross-Sectional Diameter | 0.072 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-R-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE PACKING |
| Retainer Thickness | 0.050 INCHES NOMINAL IN |
| Surface Treatment | CADMIUM RETAINER |
| Material | STEEL RETAINER |
| Material | RUBBER CHLOROPRENE CLASS CR PACKING |
| Construction | ONE-PIECE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 678654-6 | 5/9 Secondary reference Parker Hannifin Gmbh O-Ring Division |
| 620-742-6 | 5/9 Secondary reference U.S. Government activity |
| 678654-6 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5330-00-558-1732 is a Packing with Retainer, classified under FSC 5330, Packing and Gasket Materials. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5330-00-897-2431. Verify interchangeability with system specifications before substitution.
Key specifications for 5330-00-558-1732: Packing Inside Diameter: 0.555 INCHES NOMINAL IN; Outside Diameter: 1.062 INCHES NOMINAL IN; Packing Ring Cross-Sectional Diameter: 0.072 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN; Material Document and Classification: MIL-R-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE PACKING. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.