The Gasket, cataloged under National Stock Number 5330-00-366-1210, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 6 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-366-1210 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.015 INCHES NOMINAL IN |
| Center to Center Distance Between Bolt Holes Along Length | 4.359 INCHES MINIMUM AND 4.391 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Center to Center Distance Between Bolt Holes Along Width | 2.469 INCHES MINIMUM AND 2.531 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Outside Corner Radius | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN |
| Material | CELLULOSE AND RUBBER NATURAL OVERALL |
| Hole Diameter | 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 8082965 | 3/9 Design control — primary reference General Motors Corp Electro-Motive Div |
| 8082965 | 5/9 Secondary reference General Motors Corp |
NSN 5330-00-366-1210 is a Gasket, classified under FSC 5330, Packing and Gasket Materials. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5330-01-537-1586. Verify interchangeability with system specifications before substitution.
Key specifications for 5330-00-366-1210: Cross-Sectional Thickness: 0.015 INCHES NOMINAL IN; Center to Center Distance Between Bolt Holes Along Length: 4.359 INCHES MINIMUM AND 4.391 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN; Center to Center Distance Between Bolt Holes Along Width: 2.469 INCHES MINIMUM AND 2.531 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN; Outside Corner Radius: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN. 6 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.