The Packing,preformed, cataloged under National Stock Number 5330-00-350-7296, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is Sealcraft Corporation. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-350-7296 |
| Primary Part Number | 203132 |
| Item Name | Packing,preformed |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | Sealcraft Corporation |
| Status | ACTIVE |
| Cross-Sectional Height | 1.000 INCHES NOMINAL IN |
| Hardness Rating | 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL |
| Peripheral Diameter | 5.656 INCHES MINIMUM AND 5.718 INCHES MAXIMUM IN |
| Center Hole Diameter | 4.594 INCHES MINIMUM AND 4.656 INCHES MAXIMUM IN |
| Material | RUBBER SYNTHETIC OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 203132 PRIMARY | Sealcraft Corporation (USA) |
NSN 5330-00-350-7296 is a Packing,preformed, manufactured by Sealcraft Corporation, classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-00-350-7296 has 1 manufacturer part number on file: 203132 (Sealcraft Corporation).
3 possible matches (shared part number, not a government interchangeability claim): 5306-01-082-9506, 3825-01-129-8710, 5340-01-633-1502. Verify interchangeability with system specifications before substitution.
Key specifications for 203132: Cross-Sectional Height: 1.000 INCHES NOMINAL IN; Hardness Rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL; Peripheral Diameter: 5.656 INCHES MINIMUM AND 5.718 INCHES MAXIMUM IN; Center Hole Diameter: 4.594 INCHES MINIMUM AND 4.656 INCHES MAXIMUM IN. 5 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.