The Gasket, cataloged under National Stock Number 5330-00-202-4536, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 9 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-202-4536 |
| Item Name | Gasket |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Status | ACTIVE |
| Cross-Sectional Thickness | 0.750 INCHES NOMINAL IN |
| Inside Corner Radius | 0.625 INCHES NOMINAL IN |
| Hardness Rating | 60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL |
| Bearing Surface Width | 0.375 INCHES NOMINAL IN |
| Material Document and Classification | MIL-R-6855 CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Aperture Width | 20.750 INCHES NOMINAL IN |
| Aperture Length | 24.750 INCHES NOMINAL IN |
| Outside Corner Radius | 1.000 INCHES NOMINAL IN |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 9000S6202-74155REVBPC7 | 5/9 Secondary reference U.S. Government activity |
| 74182-REVD-7 | 5/9 Secondary reference Naval Sea Systems Command |
| 9000S6202-74182REV0PC7 | 5/9 Secondary reference U.S. Government activity |
| MIL-E-24142/7 | 4/1 Identification reference U.S. Government activity |
| 9000S6202-74182 -7 | 5/9 Secondary reference Zf Industrieantriebe Witten Gmbh |
| M24142/7-001 GASKET | 2/2 Government specification standardization U.S. Government activity |
NSN 5330-00-202-4536 is a Gasket, classified under FSC 5330, Packing and Gasket Materials. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5975-01-651-8878. Verify interchangeability with system specifications before substitution.
Key specifications for 5330-00-202-4536: Cross-Sectional Thickness: 0.750 INCHES NOMINAL IN; Inside Corner Radius: 0.625 INCHES NOMINAL IN; Hardness Rating: 60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL; Bearing Surface Width: 0.375 INCHES NOMINAL IN. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.