PartsTable TECHNICAL DATA SHEET
NSN 5330-00-139-7444Government record, cited

Gasket5330-00-139-7444

NSN 5330-00-139-7444 · NIIN 001397444
FSC 5330 — Packing and Gasket Materials · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5330-00-139-7444 · 5330001397444 · NIIN 001397444 · 00-139-7444 · FSC 5330 Packing and Gasket Materials · 75G-0060M PIECE 14 · 61S-0539M-001 · 61S0539M0010 · 62G008MPC14 · 61S539M
Nearby stock numbers  ·
Features
  • Gasket — FSC 5330
  • Cross-Sectional Thickness: 0.312 INCHES NOMINAL IN
  • Inside Corner Radius: 0.312 INCHES NOMINAL IN
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Hardness Rating: 20.0 SHORE DUROMETER A NOMINAL OVERALL
  • Criticality Code Justification: ZZZY
  • Style Designator: NON-CIRCULAR
  • Cross-Sectional Shape Style: SOLID SINGLE OR COMPOSITION
Identification
  • NSN: 5330-00-139-7444
  • NIIN: 001397444
  • FSC: 5330 — Packing and Gasket Materials
  • FSG: 53 — Hardware and Abrasives
General Description

The Gasket, cataloged under National Stock Number 5330-00-139-7444, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5330-00-139-7444
Item NameGasket
FSC / FSG5330 / 53 — Packing and Gasket Materials
StatusACTIVE
Cross-Sectional Thickness0.312 INCHES NOMINAL IN
Inside Corner Radius0.312 INCHES NOMINAL IN
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Hardness Rating20.0 SHORE DUROMETER A NOMINAL OVERALL
Criticality Code JustificationZZZY
Style DesignatorNON-CIRCULAR
Cross-Sectional Shape StyleSOLID SINGLE OR COMPOSITION
Aperture Width2.594 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
Aperture Length6.156 INCHES MINIMUM AND 6.188 INCHES MAXIMUM IN
Bolt Hole Quantity4
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Outside Corner Radius0.062 INCHES NOMINAL IN
MaterialRUBBER SYNTHETIC OVERALL
Hole Diameter0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeY
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5330-01-134-5827RW0428MJK. POSSIBLE MATCH
GASKET
Possible match (shared part number)R-Way Gasket & Supply Co Inc
5330-01-376-668061S0539M0010 POSSIBLE MATCH
GASKET
Possible match (shared part number)Danaher Corporation Dba Mccrometer Division
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
75G-0060M PIECE 14 5/1 Secondary reference
Ametek Inc Schutte and Koerting Div
61S-0539M-001 C/1 Advisory reference — outside the item-of-supply concept
Zf Industrieantriebe Witten Gmbh
61S0539M0010 3/1 Design control — primary reference
Danaher Corporation Dba Mccrometer Division
62G008MPC14 C/1 Advisory reference — outside the item-of-supply concept
Ametek Inc Schutte and Koerting Div
61S539M 5/9 Secondary reference
Ametek Inc Schutte and Koerting Div
Related Parts
5330-01-134-5827POSSIBLE MATCH
GASKET
RW0428MJK.
5330-01-376-6680POSSIBLE MATCH
GASKET
61S0539M0010

Frequently Asked Questions

What is NSN 5330-00-139-7444?

NSN 5330-00-139-7444 is a Gasket, classified under FSC 5330, Packing and Gasket Materials. Status: active.

What NSN replaces 5330-00-139-7444?

2 possible matches (shared part number, not a government interchangeability claim): 5330-01-134-5827, 5330-01-376-6680. Verify interchangeability with system specifications before substitution.

What are the specifications of 5330-00-139-7444?

Key specifications for 5330-00-139-7444: Cross-Sectional Thickness: 0.312 INCHES NOMINAL IN; Inside Corner Radius: 0.312 INCHES NOMINAL IN; Special Test Features: SPECIAL QUALITY CONTROL TESTING; Hardness Rating: 20.0 SHORE DUROMETER A NOMINAL OVERALL. 15 specifications are documented in the U.S. Government catalog.

Is NSN 5330-00-139-7444 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com