The Packing with Retainer, cataloged under National Stock Number 5330-00-119-8196, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is C. E. Conover & Co., Inc.. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5330-00-119-8196 |
| Primary Part Number | C14E2B333-01 |
| Item Name | Packing with Retainer |
| FSC / FSG | 5330 / 53 — Packing and Gasket Materials |
| Manufacturer | C. E. Conover & Co., Inc. |
| Status | ACTIVE |
| Retainer Inside Diameter | 2.493 INCHES NOMINAL IN |
| Packing Inside Diameter | 2.465 INCHES MINIMUM AND 2.485 INCHES MAXIMUM IN |
| Outside Diameter | 2.743 INCHES NOMINAL IN |
| Packing Ring Cross-Sectional Diameter | 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE PACKING |
| Retainer Thickness | 0.404 INCHES NOMINAL IN |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING |
| Material | PLASTIC POLYTETRAFLUOROETHYLENE RETAINER |
| Construction | TWO-PIECE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| C14E2B333-01 PRIMARY | C. E. Conover & Co., Inc. (USA) |
| Reference | Meaning |
|---|---|
| C14E2B333 | 5/9 Secondary reference C. E. Conover & Co., Inc. |
NSN 5330-00-119-8196 is a Packing with Retainer, manufactured by C. E. Conover & Co., Inc., classified under FSC 5330, Packing and Gasket Materials. Status: active.
NSN 5330-00-119-8196 has 1 manufacturer part number on file: C14E2B333-01 (C. E. Conover & Co., Inc.).
Key specifications for C14E2B333-01: Retainer Inside Diameter: 2.493 INCHES NOMINAL IN; Packing Inside Diameter: 2.465 INCHES MINIMUM AND 2.485 INCHES MAXIMUM IN; Outside Diameter: 2.743 INCHES NOMINAL IN; Packing Ring Cross-Sectional Diameter: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.