NSN 5330-00-007-2932 · NIIN 000072932 · Part number C11E450-01
C. E. Conover & Co., Inc. · FSC 5330 — Packing and Gasket Materials · FSG 53 — Hardware and Abrasives · CAGE 07060
Government record, cited
NSN 5330-00-007-2932 — this item is cataloged by the U.S. Government under National Stock Number 5330-00-007-2932. Manufacturer of record part number: C11E450-01.
Also searched as5330-00-007-2932 ·
5330000072932 ·
NIIN 000072932 ·
00-007-2932 ·
FSC 5330 Packing and Gasket Materials · CAGE 07060 · C11E450-01
Nearby stock numbers← 5330-00-007-2931
·
5330-00-007-2933 Packing with Retainer →
5330-00-007-2932 — Packing and Gasket Materials
Features
Packing with Retainer — FSC 5330
Retainer Inside Diameter: 10.790 INCHES NOMINAL IN
Packing Inside Diameter: 13.945 INCHES MINIMUM AND 14.005 INCHES MAXIMUM IN
Outside Diameter: 10.980 INCHES NOMINAL IN
Packing Ring Cross-Sectional Diameter: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
Material Document and Classification: MIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
Retainer Thickness: 0.355 INCHES NOMINAL IN
Material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
Identification
NSN: 5330-00-007-2932
NIIN: 000072932
FSC: 5330 — Packing and Gasket Materials
FSG: 53 — Hardware and Abrasives
Primary part number: C11E450-01
Manufacturer: C. E. Conover & Co., Inc.
General Description
The Packing with Retainer, cataloged under National Stock Number 5330-00-007-2932, is classified within Federal Supply Class 5330 (Packing and Gasket Materials) of the Hardware and Abrasives group. The manufacturer of record is C. E. Conover & Co., Inc.. Government technical data includes 8 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
Technical Specifications
Parameter
Value
NSN
5330-00-007-2932
Primary Part Number
C11E450-01
Item Name
Packing with Retainer
FSC / FSG
5330 / 53 — Packing and Gasket Materials
Manufacturer
C. E. Conover & Co., Inc.
Status
ACTIVE
Retainer Inside Diameter
10.790 INCHES NOMINAL IN
Packing Inside Diameter
13.945 INCHES MINIMUM AND 14.005 INCHES MAXIMUM IN
Outside Diameter
10.980 INCHES NOMINAL IN
Packing Ring Cross-Sectional Diameter
0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
Material Document and Classification
MIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
Retainer Thickness
0.355 INCHES NOMINAL IN
Material
RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
Construction
TWO-PIECE
Lifecycle & Compliance
Acquisition Status
ACTIVE
DEMIL Code
DEMIL A — No Demilitarization Required
Hazard
Possible hazard — SDS may be required (DLA HMIC P)
Other items in FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085
RETAINER
5330-00-000-0167
PARTS KIT,SEAL REPLACEMENT,MECHA
5330-00-000-5275
5330-00-000-5275 · Item name not on file
5330-00-001-1260
SEAL,NONMETALLIC SPECIAL SHAPED
5330-00-001-1833
SEAL,PLAIN ENCASED
5330-00-001-1844
GLAND,RESERVOIR,INDICATOR END
5330-00-001-1845
5330-00-001-1845 · Item name not on file
5330-00-001-1846
5330-00-001-1846 · Item name not on file
Frequently Asked Questions
What is NSN 5330-00-007-2932?
NSN 5330-00-007-2932 is a Packing with Retainer, manufactured by C. E. Conover & Co., Inc., classified under FSC 5330, Packing and Gasket Materials. Status: active.
What part numbers are listed for NSN 5330-00-007-2932?
NSN 5330-00-007-2932 has 1 manufacturer part number on file: C11E450-01 (C. E. Conover & Co., Inc.).
What are the specifications of C11E450-01?
Key specifications for C11E450-01: Retainer Inside Diameter: 10.790 INCHES NOMINAL IN; Packing Inside Diameter: 13.945 INCHES MINIMUM AND 14.005 INCHES MAXIMUM IN; Outside Diameter: 10.980 INCHES NOMINAL IN; Packing Ring Cross-Sectional Diameter: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. 8 specifications are documented in the U.S. Government catalog.
Is NSN 5330-00-007-2932 hazardous material?
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
Sources
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.