PartsTable
Technical Data Sheet
PartsTable / MRO / 532B
532B ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,PLASTIC DIELE. Key specifications include width: 86.0 MILLIMETERS NOMINAL MM, length: 173.0 MILLIMETERS NOMINAL MM, material: STEEL OVERALL, body_style: PISTON, body_length: 1.150 INCHES NOMINAL IN, flange_width: 0.2500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 532B
NSN: 3110-00-142-4407
FSC: 3110
CAGE: 61220 — TYSON BEARING CO DIV SKF INDUSTRIES INC (USA)
SPECIFICATIONS
width86.0 MILLIMETERS NOMINAL MM
length173.0 MILLIMETERS NOMINAL MM
materialSTEEL OVERALL
body_stylePISTON
body_length1.150 INCHES NOMINAL IN
flange_width0.2500 INCHES NOMINAL IN
overall_width1.1875 INCHES NOMINAL IN
inclosure_typeENCAPSULATED
overall_length1.500 INCHES NOMINAL IN
insert_materialRUBBER SINGLE MATING END
overall_diameter0.281 INCHES NOMINAL IN
special_featuresFOR PANELS 0.040 IN. TO 0.065 IN. THK IN
NSN3110-00-142-4407
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 532B · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH: 0.2500 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
OUTER RING OUTSIDE DIAMETER: 4.3750 INCHES NOMINAL IN
•
FLANGE OUTSIDE DIAMETER: 4.6250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE, FLANGED
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE WIDTH0.2500 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
OUTER RING OUTSIDE DIAMETER4.3750 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER4.6250 INCHES NOMINAL IN
OVERALL WIDTH1.1875 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE, FLANGED
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1848-9Interchangeable
interchangeable cross-reference
interchangeable
M4610-2-24Interchangeable
interchangeable cross-reference
interchangeable
532BInterchangeable
interchangeable cross-reference
interchangeable
9937Interchangeable
interchangeable cross-reference
interchangeable
242-0383-000Interchangeable
interchangeable cross-reference
interchangeable
1714-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 532B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 532B?
532B is a CAPACITOR,VARIABLE,PLASTIC DIELE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 532B?
There are 15 known substitutes for 532B: 1848-9, M4610-2-24, 532B and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 532B?
532B is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 532B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026