PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5329146
5329146 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 1.000 INCHES NOMINAL IN, special_features: 0.875 IN. RADIUS ON TONGUE ENDS IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-532-9146, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5329146
NSN: 5340-00-532-9146
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
materialSTEEL BAND
overall_width1.000 INCHES NOMINAL IN
special_features0.875 IN. RADIUS ON TONGUE ENDS IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.065 INCHES NOMINAL IN
loop_inside_diameter1.000 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.938 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.375 INCHES NOMINAL IN
NSN5340-00-532-9146
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5329146 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.938 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: STEEL BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.375 INCHES NOMINAL IN
•
DIAMETER: 0.531 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.065 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END1.938 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALSTEEL BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.375 INCHES NOMINAL IN
DIAMETER0.531 INCHES NOMINAL IN
MATERIAL THICKNESS0.065 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
SPECIAL FEATURES0.875 IN. RADIUS ON TONGUE ENDS IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
TC12Interchangeable
interchangeable cross-reference
interchangeable
FC012Interchangeable
interchangeable cross-reference
interchangeable
B107.21 TY2CL2Interchangeable
interchangeable cross-reference
interchangeable
6TMS2Interchangeable
interchangeable cross-reference
interchangeable
TC-12-MInterchangeable
interchangeable cross-reference
interchangeable
048-1033-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5329146?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5329146?
5329146 is a CLAMP,LOOP.
What parts can replace 5329146?
There are 13 known substitutes for 5329146: TC12, FC012, B107.21 TY2CL2 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5329146?
5329146 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-532-9146. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5329146

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026