PartsTable
Technical Data Sheet
Download PDF

532907 — PIN,COTTER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

532907: PIN,COTTER.

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.027 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN, material: STEEL COMP 321 OVERALL, point_type: STANDARD, style_designator: STANDARD, underloop_length: 0.120 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-238-8764, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
532907
NSN: 5340-00-238-8764
NIINs: 002388764, 009502750
FSC: 5340 — Hardware, Commercial
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
diameter0.027 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
materialSTEEL COMP 321 OVERALL
point_typeSTANDARD
style_designatorSTANDARD
underloop_length0.120 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
material_document_and_classificationAMS 7211 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-238-8764
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 532907 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.380 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 0.150 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.750 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.380 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.281 INCHES NOMINAL IN
SECOND LEG WIDTH0.150 INCHES NOMINAL IN
SECOND LEG LENGTH1.750 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.380 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 532907?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 532907?
532907 is a PIN,COTTER.
What is the NSN for 532907?
532907 is cataloged in the U.S. Government catalog under NSN 5340-00-238-8764. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 532907

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.