The Insert,panel Fastener, cataloged under National Stock Number 5325-01-185-3324, is classified within Federal Supply Class 5325 (Fastening Devices) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5325-01-185-3324 |
| Item Name | Insert,panel Fastener |
| FSC / FSG | 5325 / 53 — Fastening Devices |
| Status | ACTIVE |
| Flange Diameter | 0.486 INCHES NOMINAL0.486 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | QQ-A-225/6,T4 OR T351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Hole Diameter | 0.254 INCHES MINIMUM AND 0.254 INCHES MINIMUM AND 0.260 INCHES MAXIMUM0.260 INCHES MAXIMUM IN |
| Surface Treatment | ANODIZE OVERALL |
| Shoulder Diameter | 0.369 INCHES MINIMUM AND 0.369 INCHES MINIMUM AND 0.375 INCHES MAXIMUM0.375 INCHES MAXIMUM IN |
| Insert Style | PROTRUDING FLANGEPROTRUDING FLANGE |
| Material | ALUMINUM ALLOY 2024 OVERALL |
| Hole Type | PLAINPLAIN |
| Flange Thickness | 0.030 INCHES MINIMUM AND 0.030 INCHES MINIMUM AND 0.036 INCHES MAXIMUM0.036 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 80-011P11F3-0 | 5/2 Secondary reference U.S. Government activity |
| P101F25-1 | 5/9 Secondary reference Howmet Global Fastening Systems Inc. Div Tridair Products |
| P101F25-1 | 3/2 Design control — primary reference U.S. Government activity |
| SLP101F25-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5325-01-185-3324 is a Insert,panel Fastener, classified under FSC 5325, Fastening Devices. Status: active.
Key specifications for 5325-01-185-3324: Flange Diameter: 0.486 INCHES NOMINAL0.486 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Material Document and Classification: QQ-A-225/6,T4 OR T351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL; Hole Diameter: 0.254 INCHES MINIMUM AND 0.254 INCHES MINIMUM AND 0.260 INCHES MAXIMUM0.260 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.