The Stud,snap Fastener, cataloged under National Stock Number 5325-01-125-1307, is classified within Federal Supply Class 5325 (Fastening Devices) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5325-01-125-1307 |
| Item Name | Stud,snap Fastener |
| FSC / FSG | 5325 / 53 — Fastening Devices |
| Status | ACTIVE |
| Stud Retention Method | SCREW BASE |
| Surface Treatment Document and Classification | MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE HEAD |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE STUD |
| Stud Shank Length | 0.609 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN |
| Snap Fastener Stud Style | STUD |
| Material Document and Classification | QQ-B-613 FED SPEC 1ST MATERIAL RESPONSE OR MIL-C-50 MIL SPEC 2ND MATERIAL RESPONSE HEAD |
| Stud Base Width Across Flats | 0.344 INCHES NOMINAL IN |
| Body Length | 0.500 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND PHOSPHATE OR ZINC STUD |
| Surface Treatment | OXIDE FILM HEAD |
| Material | STEEL CORROSION RESISTING STUD |
| Material | COPPER ALLOY 260 HEAD |
| Thread Size and Series/type Designator | 0.164-32 UNIFIED NATIONAL COARSE (UNC) |
| Stud Overall Length | 1.375 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS27977-34B | 5/2 Secondary reference U.S. Government activity |
| MIL-F-10884G | 3/2 Design control — primary reference U.S. Government activity |
NSN 5325-01-125-1307 is a Stud,snap Fastener, classified under FSC 5325, Fastening Devices. Status: active.
Key specifications for 5325-01-125-1307: Stud Retention Method: SCREW BASE; Surface Treatment Document and Classification: MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE HEAD; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE STUD; Stud Shank Length: 0.609 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.