532243-1 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

532243-1: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, hardness_rating: 90.2 ROCKWELL SUPERFICIAL 15-N NOMINAL OVERALL, features_provided: CASEHARDENED, surface_treatment: OXIDE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-458-2869, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

532243-1

NSN: 5315-00-458-2869
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)

SPECIFICATIONS

material	STEEL OVERALL
surface_finish	32.0 MICROINCHES OUTSIDE DIAMETER
first_end_style	CHAMFERED
hardness_rating	90.2 ROCKWELL SUPERFICIAL 15-N NOMINAL OVERALL
features_provided	CASEHARDENED
surface_treatment	OXIDE OVERALL
pin_overall_length	3.915 INCHES MINIMUM AND 3.925 INCHES MAXIMUM IN
pin_overall_diameter	0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
first_end_taper_angle	40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
first_end_taper_length	0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
material_document_and_classification	MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_end	IDENTICAL
NSN	5315-00-458-2869

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 125.0 MICROINCHES BOTH ENDS

•

FIRST END TAPER LENGTH: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

FIRST END STYLE: CHAMFERED

•

HARDNESS RATING: 90.2 ROCKWELL SUPERFICIAL 15-N NOMINAL OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

FIRST END TAPER ANGLE: 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM

TECHNICAL CHARACTERISTICS

SURFACE FINISH	125.0 MICROINCHES BOTH ENDS
SURFACE FINISH	32.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH	0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLE	CHAMFERED
HARDNESS RATING	90.2 ROCKWELL SUPERFICIAL 15-N NOMINAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE	40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER	0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
PIN OVERALL LENGTH	3.915 INCHES MINIMUM AND 3.925 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 532243-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 532243-1?

532243-1 is a PIN,STRAIGHT,HEADLESS.

What is the NSN for 532243-1?

532243-1 is cataloged in the U.S. Government catalog under NSN 5315-00-458-2869. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

532243-1 — PIN,STRAIGHT,HEADLESS

Request a Quote — 532243-1