PartsTable
Technical Data Sheet
Download PDF

532185-5 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

532185-5: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: GREASE LUBRICATION, bore_diameter: 3.0937 INCHES NOMINAL IN, overall_width: 0.6250 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-045-1663, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
532185-5
NSN: 3110-01-045-1663
NIINs: 010451663, 010557836
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
materialGREASE LUBRICATION
bore_diameter3.0937 INCHES NOMINAL IN
overall_width0.6250 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
overall_outside_diameter3.8750 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.3
material_document_and_classificationUNABLE TO DECODE
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-045-1663
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 532185-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
•
OVERALL OUTSIDE DIAMETER: 3.8750 INCHES NOMINAL IN
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
OVERALL WIDTH0.6250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER3.8750 INCHES NOMINAL IN
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.3
BORE DIAMETER3.0937 INCHES NOMINAL IN
MATERIALGREASE LUBRICATION
SUBSTITUTES & CROSS-REFERENCES 1
3TAR49-62ULY196Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 532185-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 532185-5?
532185-5 is a BEARING,BALL,DUPLEX.
What parts can replace 532185-5?
There is 1 known substitute for 532185-5: 3TAR49-62ULY196. Substitute compatibility should be verified for your specific system.
What is the NSN for 532185-5?
532185-5 is cataloged in the U.S. Government catalog under NSN 3110-01-045-1663. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 532185-5