PartsTable
Technical Data Sheet
PartsTable / MRO / 532174
532174 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: WEBBED, OFFSET, SOLID, bore_style: INVOLUTE SPLINE BOTH ENDS, tooth_form: STUB, body_length: 4.188 INCHES NOMINAL IN, body_diameter: 1.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-131-7958, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 532174
NSN: 5315-00-131-7958
FSC: 5315
CAGE: 0ZWK8 — MOOG MILITARY AIRCRAFT LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleWEBBED, OFFSET, SOLID
bore_styleINVOLUTE SPLINE BOTH ENDS
tooth_formSTUB
body_length4.188 INCHES NOMINAL IN
body_diameter1.312 INCHES NOMINAL IN
terminal_typeFERRULE
inclosure_typeENCAPSULATED
pitch_diameter3.0000 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity30
first_end_styleSQUARE
NSN5315-00-131-7958
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 532174 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 2.040 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
•
FIRST HOLE DIAMETER: 0.656 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-26074 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: NICKEL OVERALL
•
FIRST END STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH2.040 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
FIRST HOLE DIAMETER0.656 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-26074 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTNICKEL OVERALL
SPECIAL FEATURESOD HAS SURFACE FINISH OF 32.0 MICROINCH
FIRST END STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER1.0001 INCHES MINIMUM AND 1.0004 INCHES MAXIMUM IN
MATERIALSTEEL COMP 4130 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
532174Interchangeable
interchangeable cross-reference
interchangeable
MFB305Interchangeable
interchangeable cross-reference
interchangeable
MILR29Interchangeable
interchangeable cross-reference
interchangeable
588616-4Interchangeable
interchangeable cross-reference
interchangeable
532174-1Interchangeable
interchangeable cross-reference
interchangeable
F12NC4284-1-40Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 532174?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 532174?
532174 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 532174?
There are 8 known substitutes for 532174: 532174, MFB305, MILR29 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 532174?
532174 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-131-7958. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 532174

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026