PartsTable
Technical Data Sheet
Download PDF

5320PL1811088 — COLLAR,PIN-RIVET

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

5320PL1811088: COLLAR,PIN-RIVET.

The COLLAR,PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303SE OVERALL, lubrication: GREASE FILM, collar_style: THREADED (BREAK OFF) TYPE, thread_class: 3B, thread_direction: RIGHT-HAND, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-225-0506, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5320PL1811088
NSN: 5320-00-225-0506
FSC: 5320 — Rivets
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 303SE OVERALL
lubricationGREASE FILM
collar_styleTHREADED (BREAK OFF) TYPE
thread_class3B
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.190 INCHES IN
collar_overall_height0.432 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
collar_inside_diameter0.255 INCHES NOMINAL IN
collar_outside_diameter0.355 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF)
NSN5320-00-225-0506
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available COLLAR,PIN-RIVET TITLE COMPONENT PN 5320PL1811088 MFR COLLAR,PIN-RIVET
KEY FEATURES
•
LUBRICATION: GREASE FILM
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
COLLAR INSIDE DIAMETER: 0.255 INCHES NOMINAL IN
•
COLLAR OVERALL HEIGHT: 0.432 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
•
COLLAR STYLE: THREADED (BREAK OFF) TYPE
•
COLLAR OUTSIDE DIAMETER: 0.355 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
LUBRICATIONGREASE FILM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
COLLAR INSIDE DIAMETER0.255 INCHES NOMINAL IN
COLLAR OVERALL HEIGHT0.432 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
COLLAR STYLETHREADED (BREAK OFF) TYPE
COLLAR OUTSIDE DIAMETER0.355 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
HL75-6AWReference document
Same NSN cross-reference
Reference document — Design control — primary reference
30-139-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
HS5580-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
1213AS628-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5320PL1811088?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5320PL1811088?
5320PL1811088 is a COLLAR,PIN-RIVET.
What parts can replace 5320PL1811088?
There are 4 known substitutes for 5320PL1811088: HL75-6AW, 30-139-6, HS5580-6 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5320PL1811088?
5320PL1811088 is cataloged in the U.S. Government catalog under NSN 5320-00-225-0506. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5320PL1811088