532007-1: CONNECTOR.
The CONNECTOR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, overall_length: 0.375 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL, mounting_method: THREADED STUD(S). This part is cataloged in the U.S.
Government catalog under NSN 5315-00-220-2953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 4130 OVERALL |
| overall_length | 0.375 INCHES NOMINAL IN |
| surface_finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| first_end_style | CHAMFERED |
| hardness_rating | 40.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL |
| mounting_method | THREADED STUD(S) |
| pin_overall_length | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN |
| nominal_thread_size | 0.250 INCHES IN |
| pin_overall_diameter | 0.2187 INCHES MINIMUM AND 0.2190 INCHES MAXIMUM IN |
| first_end_taper_angle | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM |
| first_end_taper_length | 0.015 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| end_item_identification | AN/WLY-1(V)3, MSAI |
| NSN | 5315-00-220-2953 |
| SURFACE FINISH | 125.0 MICROINCHES BOTH ENDS |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| FIRST END TAPER LENGTH | 0.015 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| FIRST END STYLE | CHAMFERED |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| FIRST END TAPER ANGLE | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM |
| PIN OVERALL DIAMETER | 0.2187 INCHES MINIMUM AND 0.2190 INCHES MAXIMUM IN |
| PIN OVERALL LENGTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
No substitute or cross-reference records for this part.