PartsTable TECHNICAL DATA SHEET
NSN 5320-01-732-8390Government record, cited

Pin-Rivet5320-01-732-8390

NSN 5320-01-732-8390 · NIIN 017328390 · Part number HL706AZ-14-49
Hi-Shear Corporation · FSC 5320 — Rivets · FSG 53 — Hardware and Abrasives · CAGE 73197
Government record, cited
NSN 5320-01-732-8390 — this item is cataloged by the U.S. Government under National Stock Number 5320-01-732-8390. Manufacturer of record part number: HL706AZ-14-49.
Also searched as  5320-01-732-8390 · 5320017328390 · NIIN 017328390 · 01-732-8390 · FSC 5320 Rivets · CAGE 73197 · HL706AZ-14-49 · HL706
Nearby stock numbers  ·
Features
  • Pin-Rivet — FSC 5320
  • Shank Diameter: 0.4829 INCHES MINIMUM AND 0.4839 INCHES MAXIMUM IN
  • Head Height: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
  • Fastener Length: 3.7125 INCHES MINIMUM AND 3.7325 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: UNABLE TO DECODE
  • Material Document and Classification: UNABLE TO DECODE
  • Head Style: COUNTERSUNK W/REVERSE CHAMFER
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5320-01-732-8390
  • NIIN: 017328390
  • FSC: 5320 — Rivets
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: HL706AZ-14-49
  • Manufacturer: Hi-Shear Corporation
General Description

The Pin-Rivet, cataloged under National Stock Number 5320-01-732-8390, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5320-01-732-8390
Primary Part NumberHL706AZ-14-49
Item NamePin-Rivet
FSC / FSG5320 / 53 — Rivets
ManufacturerHi-Shear Corporation
StatusACTIVE
Shank Diameter0.4829 INCHES MINIMUM AND 0.4839 INCHES MAXIMUM IN
Head Height0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
Fastener Length3.7125 INCHES MINIMUM AND 3.7325 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationUNABLE TO DECODE
Material Document and ClassificationUNABLE TO DECODE
Head StyleCOUNTERSUNK W/REVERSE CHAMFER
Thread DirectionRIGHT-HAND
Nominal Thread Size0.4375 INCHES IN
Grip Length3.0575 INCHES MINIMUM AND 3.0675 INCHES MAXIMUM IN
Width Between Flats0.1895 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM IN
Shank StylePIN-RIVET, STRAIGHT, THREADED
Surface TreatmentUNABLE TO DECODE
Countersink Angle90.0 DEGREES NOMINAL
Shear Strength95000 SINGLE POUNDS PER SQUARE INCH
Thread Class3A A
Thread Quantity Per Inch20
MaterialUNABLE TO DECODE
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Major Diameter0.685 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
HL706AZ-14-49 PRIMARY Hi-Shear Corporation (USA)
Reference documents
ReferenceMeaning
HL706 D/9 Drawing number reference only
Hi-Shear Corporation

Frequently Asked Questions

What is NSN 5320-01-732-8390?

NSN 5320-01-732-8390 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.

What part numbers are listed for NSN 5320-01-732-8390?

NSN 5320-01-732-8390 has 1 manufacturer part number on file: HL706AZ-14-49 (Hi-Shear Corporation).

What are the specifications of HL706AZ-14-49?

Key specifications for HL706AZ-14-49: Shank Diameter: 0.4829 INCHES MINIMUM AND 0.4839 INCHES MAXIMUM IN; Head Height: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN; Fastener Length: 3.7125 INCHES MINIMUM AND 3.7325 INCHES MAXIMUM IN; Surface Treatment Document and Classification: UNABLE TO DECODE. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5320-01-732-8390 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com