The Pin-Rivet, cataloged under National Stock Number 5320-01-730-7115, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-730-7115 |
| Primary Part Number | HLT110AP16-15 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.5141 INCHES MINIMUM AND 0.5151 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Head Height | 0.103 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Fastener Length | 1.6675 INCHES MINIMUM AND 1.6875 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ALUMINUM PIGMENTED COATING PER HI-SHEAR SPEC 294 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS4928 OR AMS4967 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.5000 INCHES IN |
| Grip Length | 0.9325 INCHES MINIMUM AND 0.9475 INCHES MAXIMUM IN |
| Width Between Flats | 0.2207 INCHES MINIMUM AND 0.2242 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | ALUMINUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 45.0 DEGREES NOMINAL |
| Shear Strength | 95000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | TITANIUM ALLOY UNS R56400 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.735 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT110AP16-15 PRIMARY | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| HLT110 | D/9 Drawing number reference only Hi-Shear Corporation |
NSN 5320-01-730-7115 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-730-7115 has 1 manufacturer part number on file: HLT110AP16-15 (Hi-Shear Corporation).
Key specifications for HLT110AP16-15: Shank Diameter: 0.5141 INCHES MINIMUM AND 0.5151 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Head Height: 0.103 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN; Fastener Length: 1.6675 INCHES MINIMUM AND 1.6875 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.