The Pin-Rivet, cataloged under National Stock Number 5320-01-730-6416, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-730-6416 |
| Primary Part Number | HLT411AP14-18 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.4365 INCHES MINIMUM AND 0.4374 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Head Height | 0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| Fastener Length | 1.75 INCHES MINIMUM AND 1.77 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ALUMINUM PIGMENTED COATING PER HI-SHEAR SPEC 294 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS4928 OR AMS4967 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.4375 INCHES IN |
| Grip Length | 1.120 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN |
| Width Between Flats | 0.1895 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | ALUMINUM OVERALL |
| Minimum Tensile Strength | 95000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | TITANIUM ALLOY UNS R56400 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.6620 INCHES MINIMUM AND 0.6680 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT411AP14-18 PRIMARY | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| HLT411 | D/9 Drawing number reference only Hi-Shear Corporation |
NSN 5320-01-730-6416 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-730-6416 has 1 manufacturer part number on file: HLT411AP14-18 (Hi-Shear Corporation).
Key specifications for HLT411AP14-18: Shank Diameter: 0.4365 INCHES MINIMUM AND 0.4374 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Head Height: 0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN; Fastener Length: 1.75 INCHES MINIMUM AND 1.77 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.