The Pin-Rivet, cataloged under National Stock Number 5320-01-729-4934, is classified within Federal Supply Class 5320 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Hi-Shear Corporation. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-729-4934 |
| Primary Part Number | HL1054PB-6-10 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — No Item Name Available |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| Material Document and Classification | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Thread Quantity Per Inch | 32 |
| Grip Length | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Head Style | STRAIGHT PAN |
| Head Major Diameter | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Head Height | 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN |
| Thread Class | 3A A |
| Thread Direction | RIGHT-HAND |
| Shank Diameter | 0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN |
| Fastener Length | 0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Nominal Thread Size | 0.1900 INCHES IN |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Surface Treatment Document and Classification | QQ-P-416, TYPE 2, CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| HL1054PB-6-10 PRIMARY | Hi-Shear Corporation (USA) |
| HL1054 | Hi-Shear Corporation (USA) |
NSN 5320-01-729-4934 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320 (No Item Name Available). Status: active.
NSN 5320-01-729-4934 has 2 cross-referenced part numbers: HL1054PB-6-10 (Hi-Shear Corporation), HL1054 (Hi-Shear Corporation).
There is 1 known substitute for 5320-01-729-4934: 5320-01-165-7626. Verify interchangeability with system specifications before substitution.
Key specifications for HL1054PB-6-10: Thread Series Designator: UNIFIED NATIONAL JOINT FINE (UNJF); Material: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL; Material Document and Classification: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL; Thread Quantity Per Inch: 32. 20 total characteristics are documented in the Federal Logistics Information System.