The Pin-Rivet, cataloged under National Stock Number 5320-01-729-0484, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-729-0484 |
| Primary Part Number | HLT109AP6-11 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.2016 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Head Height | 0.0394 INCHES MINIMUM AND 0.0415 INCHES MAXIMUM IN |
| Fastener Length | 1.0375 INCHES MINIMUM AND 1.0575 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | HI-SHEAR SPEC 294 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS4928 OR AMS4967 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.1900 INCHES IN |
| Grip Length | 0.6825 INCHES MINIMUM AND 0.9675 INCHES MAXIMUM IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | ALUMINUM OVERALL |
| Minimum Tensile Strength | 95000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | TITANIUM ALLOY UNS R56400 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT109AP6-11 PRIMARY | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| HLT109 | D/9 Drawing number reference only Hi-Shear Corporation |
NSN 5320-01-729-0484 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-729-0484 has 1 manufacturer part number on file: HLT109AP6-11 (Hi-Shear Corporation).
Key specifications for HLT109AP6-11: Shank Diameter: 0.2016 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Head Height: 0.0394 INCHES MINIMUM AND 0.0415 INCHES MAXIMUM IN; Fastener Length: 1.0375 INCHES MINIMUM AND 1.0575 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.