The Rivet,blind, cataloged under National Stock Number 5320-01-722-9078, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba Cherry Aerospace Div Div Cherry Aerospace. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-722-9078 |
| Primary Part Number | CCR244CS-4-02IPR |
| Item Name | Rivet,blind |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Sps Technologies, Llc Dba Cherry Aerospace Div Div Cherry Aerospace |
| Status | ACTIVE |
| Head Height | 0.028 INCHES NOMINAL IN |
| Fastener Length | 0.193 INCHES NOMINAL IN |
| Tip Diameter | 0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE STEM |
| Surface Treatment | CADMIUM SLEEVE |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Material | STEEL CORROSION RESISTING OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| CCR244CS-4-02IPR PRIMARY | Sps Technologies, Llc Dba Cherry Aerospace Div Div Cherry Aerospace (USA) |
NSN 5320-01-722-9078 is a Rivet,blind, manufactured by Sps Technologies, Llc Dba Cherry Aerospace Div Div Cherry Aerospace, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-722-9078 has 1 manufacturer part number on file: CCR244CS-4-02IPR (Sps Technologies, Llc Dba Cherry Aerospace Div Div Cherry Aerospace).
Key specifications for CCR244CS-4-02IPR: Head Height: 0.028 INCHES NOMINAL IN; Fastener Length: 0.193 INCHES NOMINAL IN; Tip Diameter: 0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN; Head Style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER). 9 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.