The Pin-Rivet, cataloged under National Stock Number 5320-01-719-4154, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-719-4154 |
| Primary Part Number | HL325-6-7 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Sps Technologies, Llc Dba PB Fasteners |
| Status | ACTIVE |
| Shank Diameter | 0.104 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN |
| Head Height | 0.0667 INCHES MINIMUM AND 0.0688 INCHES MAXIMUM IN |
| Fastener Length | 0.7395 INCHES MINIMUM AND 0.7595 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.1875 INCHES IN |
| Grip Length | 0.4315 INCHES MINIMUM AND 0.4425 INCHES MAXIMUM IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 3100 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 6100 DOUBLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.3486 INCHES MINIMUM AND 0.3536 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL325-6-7 PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HL325-6-7 PRIMARY | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| HL325 | D/9 Drawing number reference only Hi-Shear Corporation |
| HL325-6-7 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-719-4154 is a Pin-Rivet, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-719-4154 has 2 manufacturer part numbers on file: HL325-6-7 (Sps Technologies, Llc Dba PB Fasteners), HL325-6-7 (Hi-Shear Corporation).
1 possible match (shared part number, not a government interchangeability claim): 5320-01-719-4164. Verify interchangeability with system specifications before substitution.
Key specifications for HL325-6-7: Shank Diameter: 0.104 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN; Head Height: 0.0667 INCHES MINIMUM AND 0.0688 INCHES MAXIMUM IN; Fastener Length: 0.7395 INCHES MINIMUM AND 0.7595 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.