The Pin-Rivet, cataloged under National Stock Number 5320-01-717-0738, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-717-0738 |
| Primary Part Number | HST13YW10-12 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Lubrication | SOLID FILM OR CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Head Height | 0.1330 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM IN |
| Fastener Length | 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 4928 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS 4967 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Tip Diameter | 0.3020 INCHES MINIMUM AND 0.3060 INCHES MAXIMUM IN |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.3125 INCHES IN |
| Grip Length | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN |
| Width Between Flats | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 14600 DOUBLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | TITANIUM ALLOY OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.6287 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM IN |
| Hole Diameter | 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HST13YW10-12 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HST13YW10-12 PRIMARY | Hi-Shear Corporation (USA) |
| HST13YW10-12 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| Reference | Meaning |
|---|---|
| HST13 | D/9 Drawing number reference only Hi-Shear Corporation |
NSN 5320-01-717-0738 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-717-0738 has 3 manufacturer part numbers on file: HST13YW10-12 (Sps Technologies, Llc Dba PB Fasteners), HST13YW10-12 (Hi-Shear Corporation), HST13YW10-12 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company).
1 possible match (shared part number, not a government interchangeability claim): 5320-01-717-2091. Verify interchangeability with system specifications before substitution.
Key specifications for HST13YW10-12: Shank Diameter: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN; Lubrication: SOLID FILM OR CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Head Height: 0.1330 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM IN; Fastener Length: 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.