The Pin-Rivet, cataloged under National Stock Number 5320-01-715-1114, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 5 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-715-1114 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.5625 INCHES NOMINAL IN |
| Material Document and Classification | AMS4928 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL |
| Tip Diameter | 0.4919 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM IN |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.674 INCHES NOMINAL IN |
| Shank Style | PIN-RIVET, TAPERED, THREADED |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | TITANIUM ALLOY OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.998 INCHES MINIMUM AND 1.018 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| TLV340L | D/9 Drawing number reference only Sps Technologies Llc Dba PB Fasteners Div PB Fasteners |
| TLV340L-9-27E | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-715-1114 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
5 possible matches (shared part number, not a government interchangeability claim): 5320-01-715-1117, 5320-01-715-1136, 5320-01-715-1145. Verify interchangeability with system specifications before substitution.
Key specifications for 5320-01-715-1114: Shank Diameter: 0.5625 INCHES NOMINAL IN; Material Document and Classification: AMS4928 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL; Tip Diameter: 0.4919 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM IN; Head Style: FLUSH COUNTERSUNK. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.