The Pin-Rivet, cataloged under National Stock Number 5320-01-714-8786, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 6 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-714-8786 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.6537 INCHES NOMINAL IN |
| Lubrication | DRY FILM AND CETYL ALCOHOL |
| Head Height | 0.240 INCHES MAXIMUM IN |
| Fastener Length | 2.228 INCHES NOMINAL IN |
| Material Document and Classification | AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Tip Diameter | 0.5538 INCHES MINIMUM AND 0.5605 INCHES MAXIMUM IN |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.5625 INCHES IN |
| Shank Style | PIN-RIVET, TAPERED, THREADED |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 95000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | TITANIUM ALLOY OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 1.226 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| TL310L | D/9 Drawing number reference only U.S. Government activity |
| TLV310L-9-27E | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-714-8786 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
6 possible matches (shared part number, not a government interchangeability claim): 5320-01-716-4297, 5320-01-717-6717, 5320-01-717-6720. Verify interchangeability with system specifications before substitution.
Key specifications for 5320-01-714-8786: Shank Diameter: 0.6537 INCHES NOMINAL IN; Lubrication: DRY FILM AND CETYL ALCOHOL; Head Height: 0.240 INCHES MAXIMUM IN; Fastener Length: 2.228 INCHES NOMINAL IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.